User's Manual

Product Manual – Genie Air
TM
Version 1.3.0 – 11/22/2016
Page 23 DIRECTV, Inc. Proprietary and Confidential
功
功功
功能變
能變能變
能變數代
數代數代
數代碼變
碼變碼變
碼變更
更更
更
FIGURE 171716: MANAGE CLIENTS - STOP LOOKING SCREEN (SUBJECT TO CHANGE)
• If the user skips the Stop Looking step, the Add Client mode will
automatically timeout within 1 hour (during initial install) or 20 minutes (if
Add Client button was pressed).
D. ADD EXTERNAL WVB
Genie Air
TM
supports the configuration of an External WVB as a Wireless Extender to the
Internal WVB.
The following are the steps to install an External WVB.
1) Install the WVB in an optimal location as per current WVB placement guidance.
2) Ensure the Genie Air
TM
server is Turned On.
3) Ensure all the Wireless clients are turned Off (in standby).
4) Connect the power and coax cables to the external Wireless Video Bridge.
5) After the WVB boots up (WVB LED turns Solid Green / Blue), turn On the
Wireless clients.
6) The clients will display “A wireless video bridge has been found and configured
successfully”.
7) The client will automatically connect to the new WVB if it has a better signal
than to the Genie Air
TM
.
8) Ensure the Wireless clients have a Green LED and show video.
9) When the user selects Menu -> Settings -> Whole-Home -> Video Bridge ->
Video Bridge Status, the external WVB will be listed in addition to the internal
WVB.