User's Manual

Product Manual – Genie Air
TM
Version 1.3.0 – 11/22/2016
Page 20 DIRECTV, Inc. Proprietary and Confidential
功
功功
功能變
能變能變
能變數代
數代數代
數代碼變
碼變碼變
碼變更
更更
更
B. C LIENT I NSTALLATION
The Genie Air
TM
must be Setup and Functioning before any RVU Clients can complete
installation. The following steps are to be followed at Initial Installation or when adding
clients post installation.
1. Genie Wired Client
The following are the Steps to Install the Genie Wired Client.
1) Connect the Genie Wired Client to the SWiM/MoCA network via coax.
2) Connect the Genie Client to a TV.
3) Plug the Genie client power cable into a power source and power on the Wired
Client.
4) Follow the Add A Client Process section below to add clients.
2. Genie Wireless Client
Since Genie Air
TM
has an in-built WVB no Site Survey will be performed.
The following are the Steps to Install Wireless Clients
1) Connect the Genie Wireless Client to a TV.
2) Plug the Genie client power cable into a power source and power on the
Wireless Client.
3) The Wireless client will try to connect to the server and the “Connecting to Video
Bridge” screen will be displayed.
• If Wireless Signal Strength is Green / Signal Quality is Excellent or Good,
the following screen is displayed, and the user can select “Connect Now”.
FIGURE 13: CONNECTING TO WVB - EXCELLENT SIGNAL STRENGTH SCREEN
• If Signal Strength/Quality is Yellow/Fair or Red/Poor, the Genie Air
TM
or
Wireless Client should be moved, or an External WVB should be added to
the install (follow normal guidance for WVB and Wireless Client
placement and troubleshooting).