User's Manual

Product Manual – Genie Air
TM
Version 1.3.0 – 11/22/2016
Page 16 DIRECTV, Inc. Proprietary and Confidential
功
功功
功能變
能變能變
能變數代
數代數代
數代碼變
碼變碼變
碼變更
更更
更
• The SWDL duration via Satellite will be approx. the same as today while
the broadband download will be faster.
• Once the download completes, the Genie Air
TM
will reboot itself, and LED
sequence will go back to step 1 (Status LED Off for approx. 10 seconds,
Solid White for approx. 5 seconds)
• SWDL failure: In case of any issues during SWDL, the Status LED will
start Flashing Red. At this point the Genie Air
TM
will reboot itself and
attempt to download the software again.
3) The Status LED will turn Flashing Green (approx. 3-4 minutes), and the Add
Client button will begin Flashing Green (this indicates that the Installer’s Mobile
App and Wireless Clients can connect to the Genie Air
TM
).
4) The Installer can see the Initial setup screens by one of the following:
• On the Installer’s mobile device with the Mobile Installation App (that has
been previously configured), turn the Wi-Fi On. Then connect the
Installer’s mobile device to the Genie Air
TM
internal WVB wireless network
and launch the App. The role of the App is to allow the technician to setup
the Genie Air
TM
without a TV connected to it.
• If the Installer’s Mobile Device is unable to detect the WVB
Wireless Network, press the “Add Client” Button on the Genie
Air
TM
.
• This connection does not need Internet or cellular service.
• The steps for the one-time configuration of the Mobile Installation
App is explained in the Appendix.
• Connect a Wireless client to a TV to see the same installation screens
that will be displayed on the Mobile Installation App. If the screens don’t
appear, press the “Add Client” Button on the Genie Air
TM
• Connect a Wired Client to a TV and the Genie Air
TM
MoCA network to see
the same installation screens that will be displayed on the Mobile
Installation App.
5) The following Satellite Dish Setup (Verifying configuration) screen will be
displayed on the Mobile Installation App (or clients).