User's Manual

Product Manual – Genie Air
TM
Version 1.3.0 – 11/22/2016
Page 15 DIRECTV, Inc. Proprietary and Confidential
功
功功
功能變
能變能變
能變數代
數代數代
數代碼變
碼變碼變
碼變更
更更
更
V. I NSTALLATION
A. GENIE AIR
TM
INITIAL INSTALLATION
The following steps are to be followed by an Installer for new installations (not replacement).
1. Physical Installation
Genie Air
TM
needs to be placed in a vertical position. Since Genie Air
TM
is a Headless
Server, a TV cannot be attached to it, and this provides placement flexibility.
Steps To Install Genie Air
TM
:
1) Install the ODU with a Digital SWiM LNB.
• Refer D-114 H44 Tech Comm for detailed information regarding
installation using the built-in SWiM power inserter.
2) If Internet is available (or will be available soon if known), place the Genie Air
TM
near the customer’s router and connect the Ethernet cable from the customer’s
router to the Genie Air
TM
. Genie Air
TM
will automatically connect to the Internet.
This is the preferred method. The minimum distance from other Wireless
devices is 4 feet (similar to present day wireless video and Wi-Fi guidance).
• Alternate Internet Connection – The Genie Air
TM
can also be Internet
connected using BB-DECA or Internal Wi-Fi (similar to HR44/54).
• Alternate Genie Air
TM
Location: Place the Genie Air
TM
in a location for
optimal signal between the built-in WVB and Wireless Client (per current
WVB placement guidance). Refer D-040 WVB Tech Comm for detailed
information.
3) Connect the coax cable from the wall plate to the Genie Air
TM
.
4) Connect the power cable to the Genie Air
TM
.
2. Genie Air
TM
Boot-Up & Activation
Once the Genie Air
TM
has Power, the Status LED on the front of the Genie Air
TM
goes
through various color state changes.
1) The Status LED remains OFF during boot-up (about 10 seconds). Note: This
initial LED Off state is subject to change before launch.
2) Once the Status LED turns Solid White (approx. 5 seconds), the Installer needs
to press the Add Client button located at the top of the Genie Air
TM
to force a
SWDL to the Genie Air
TM
(if necessary).
• SWDL over Broadband takes priority over SWDL over Satellite.
• The Status LED will change to Flashing White while the download occurs.
• Do not unplug or reset the Genie Air
TM
while it is in the Flashing White
LED state.