User Manual Part 1

If the audio is in a language that you did not expect to hear:

• Youmayhavechangedtoanalternatelanguagesetting–Pressthe“LANG”button

onyourremotecontroloneortwotimes.

If the remote is turning the TV o and on and changing the channels

but not changing the volume:

• YourTVvolumemayhavebeenturnedallthewaydownormutedwiththeoldTV

remote.Refertopage26.

If your HD-DTA is not coming on:

• MakesurethatthepowercordissecurelyconnectedtothebackoftheHD-DTA.

• MakesurethattheHD-DTApowercordispluggedintoaworkingpoweroutlet.

If you cannot get the HD-DTA remote programmed to your TV:

• YoumaynotbehittingtheCH+enoughtimes.

• Besuretopushthe“set”buttonwithin5secondsonceyourTVturnso.

• YoumaybehittingtheCH+oncetheTVhasalreadyturnedo.Startoverandpress

thebuttonslowly.

• Trythealternateprogrammingmethodonpage19.

VCR is not recording the right channel:

• TheVCRwillonlyrecordthechannelthattheHD-DTAistunedto.SetyourTV

andVCRtotheproperchannel(Ch 3 or Ch 4),thenusetheHD-DTAremoteto

tunetheHD-DTAtothechanneltoberecorded.

C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K