User Manual Part 1

Troubleshooting Guide

If the remote control does not work:

• Checkthatthebatteriesstillhavechargeandareinsertedcorrectly.

• Makesureyourremotecan“see”thefrontoftheHD-DTA.

If there is no picture on the TV and the light on the HD-DTA is

blinking:

• Checkyourcoaxialcablesandmakesurethattheyareattached

correctly.

• UnplugtheHD-DTA,plugitbackin,thenwait5minutesforittoreset.

If there is no picture on the TV and the light on the HD-DTA is solid

(not blinking):

• CheckthattheTVistunedtotheproperchannel(Ch 3 or Ch 4).

• IfyouarealsoconnectedtoaVCR,tryturningtheVCRo.

• CheckthattheHD-DTAisconnecteddirectlytothecableprovider

outletinyourwall.

• Makesurethatallcablesarermlyconnected.

• ChecktheinputsettingonyourTV,makesurethatitisseton

ANTorCABLE.

C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K