User Manual Part 1

Press and hold

both buttons at the

same time

Step 1

Step 2

Turn on your TV using the buttons on the TV or the TV remote.

Install the batteries (included in your kit) in your new remote control.

Press and hold both Digit

1 and Digit 3 buttons together until the red light turns on.

Release both buttons.

Keep your eyes on

the remote so you can

watch the red light.

Note: Your TV must always be set to the proper channel (Ch 3 or Ch 4)

or HDMI Input to match the output channel on the back of your HD-DTA.

C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K