User Manual Part 1

If you received more than one HD-DTA, this would be a good time to

get the others installed so you can activate them all with one call.

Channel 3/4

Connecting to the Network and

activating your HD-DTA

Remember, you must wait 20 minutes before calling to

activate. This will allow the HD-DTA to connect to the

network and get the latest updates.

Call your cable operator’s automated activation line

and follow the instructions.

Turn on your TV and tune it to the proper output channel (Ch 3 or Ch 4).

Note: The serial number can be found on the bottom of the

HD-DTA itself and is also printed on the outside of the

HD-DTA package.

Note:

To complete your activation, you will need your account information

and the serial number of each HD-DTA you are activating.

C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K