User Manual Part 1

If you are connecting the HD-DTA to a television with HDMI,

set your TV to choose “HDMI” as the input source.

Pick which output channel your TV will use and make sure your television

is set to that selected channel

by setting the switch on the back of the HD-DTA

to the proper output channel (Ch

3 or Ch 4).

Power Up

Find the power cord included in the kit. Plug the end of the

power cord into the power input “+

5V DC In” on the back of the HD-DTA.

C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K