User Manual Part 1

10
If you have a VCR, follow the directions on this page 9.
Connecting to a TV with Coax cable
(No VCR)
A
Find the 5-foot coax cable included in this
kit. Connect one end of the cable to the
“To TV” input on the back of the HD-DTA.
B
Connect the other end to the “Cable In/RF
In” input on the back of your TV.
A
Turn o your TV.
B
Locate the cable that currently runs from
the cable wall outlet to the back of your
VCR (or other recording device). Leave one
end of the cable connected to the wall, but
disconnect the other end from the back of
your VCR.
C
Reconnect this end of the cable to the
“Cable In” input on the back of the
HD-DTA.
Cable Outlet
Wall
B
VCR
Wall
Cable Outlet
C
A
B
Cable IN / RF IN
Connect the HD-DTA
to the Cable Outlet
Connect the HD-DTA
to the TV
1
2
C 25M 75Y 50K CY GB50 75M 25Y K 25C MY GB75 50C GB25 M 50Y 25K CM P 75C 50M Y 75K