315-4PN33

Event-ID Description
0xE101 Memory card error file system
0xE102 Memory card error FAT
0xE104 Memory card error at saving
0xE200 Memory card writing finished (Copy Ram2Rom)
0xE210 Memory card reading finished (reload after overall reset)
0xE21E Memory card reading: Error at reload (after overall reset), file "Protect.wld"
too big
0xE21F Memory card reading: Error at reload (after overall reset), file read error, out
of memory
0xE300 Internal flash writing finished (Copy Ram2Rom)
0xE310 Internal flash writing finished (reload after battery failure)
0xE311 Internal flash fx0000yy.wld file too big, load failure
0xE400 Memory card with the option memory expansion was plugged
0xE401 Memory card with the option memory expansion was removed
0xE402 The PROFIBUS DP master functionality is disabled. The interface acts fur-
ther as MPI interface
0xE403 The PROFIBUS DP slave functionality is disabled. The interface acts further
as MPI interface
0xE500 Memory management: Deleted block without corresponding entry in Block
List
ZInfo2: BlockType
ZInfo3: BlockNo
0xE604 Multiple parametrization of a periphery address for Ethernet PG/OP channel
ZInfo1: Periphery address
ZInfo3:
0: Periphery address is input, 1: Periphery address is output
0xE701 Internal error - Please contact the VIPA Hotline!
0xE703 Internal error - Please contact the VIPA Hotline!
0xE720 Internal error - Please contact the VIPA Hotline!
0xE721 Internal error - Please contact the VIPA Hotline!
0xE801 CMD - Auto command: CMD_START recognized and successfully executed
0xE802 CMD - Auto command: CMD_End recognized and successfully executed
0xE803 CMD - Auto command: WAIT1SECOND recognized and successfully exe-
cuted
VIPA System 300SDeployment CPU 315-4PN33
VIPA specific diagnostic entries
HB140 | CPU | 315-4PN33 | GB | 14-43 68