315-4PN33

CMD_END

Marks the end of the command sequence (0xE802)

... arbitrary text ...

Text after the command CMD_END is not evaluated.

The parameters IP address, subnet mask and gateway

may be received from the system administrator.

Enter the IP address if there is no gateway used.

5.18 VIPA specific diagnostic entries

You may read the diagnostic buffer of the CPU via the Siemens

SIMATIC Manager. Besides of the standard entries in the diagnostic

buffer, the VIPA CPUs support some additional specific entries in

form of event-IDs.

The current content of the diagnostics buffer is stored at the memory

card by means of the CMD DIAGBUF.

Every register of the module information is supported by

the VIPA CPUs. More information may be found at the

online help of the Siemens SIMATIC Manager.

To monitor the diagnostic entries you choose the option ‘PLC

è Module Information

’ in the Siemens SIMATIC Manager. Via the

Entries in the diag-

nostic buffer

Monitoring the diag-

nostic entries

VIPA System 300S Deployment CPU 315-4PN33

VIPA specific diagnostic entries

HB140 | CPU | 315-4PN33 | GB | 14-43 65