315-4PN33
The write command is controlled by means of the block area of the
Siemens SIMATIC Manager ‘PLC è Copy RAM to ROM’. During the
write process the MC LED of the CPU is blinking. When the LED
expires the write process is finished.
If this project is to be loaded automatically from the MMC with Pow-
erON, you have to rename this on the MMC to AUTOLOAD.WLD.
After a MMC access, an ID is written into the diagnostic buffer of the
CPU. To monitor the diagnosis entries, you select ‘PLC
è Module Information
’ in the Siemens SIMATIC Manager. Via the
register "Diagnostic Buffer" you reach the diagnosis window.
Information about the event IDs
Ä
Chapter 5.18 ‘VIPA specific diag-
nostic entries’ on page 65.
5.10 Access to the internal Web page
The Ethernet PG/OP channel provides a web page that you may
access via an Internet browser by its IP address. The web page con-
tains information about firmware versions, current cycle times etc.
The current content of the web page is stored on MMC by means of
the MMC-Cmd WEBPAGE.
Ä
Chapter 5.17 ‘MMC-Cmd - Auto com-
mands’ on page 63
A PG/OP channel connection should be established between PC with
Internet browser and CPU 315-4PN33. This may be tested by Ping to
the IP address of the PG/OP channel.
The access takes place via the IP address of the Ethernet PG/OP
channel. The web page only serves for information output. The moni-
tored values are not alterable.
CPU with Ethernet-PG/OP
Slot 100
VIPA 315-4PN33 V.... Px000175.pkg,
SERIALNUMBER 05439
Order no., firmware vers.,
package, serial no.
SUPPORTDATA :
PRODUCT V3596, HARDWARE V0112, 5757C-V11 ,
HX000071.110 , Bx000227 V6596, Ax000086 V1200,
Ax000127 V1020, fx000007.wld V1180, FlashFileSystem :
V102
Information for support
Memorysizes (Bytes): LoadMem : 524288, WorkMem-
Code : 262144, WorkMemData : 262144
Information about memory con-
figuration, load memory, work
memory (code/data)
Transfer control
Access to the web page
Requirements
Web page
VIPA System 300SDeployment CPU 315-4PN33
Access to the internal Web page
HB140 | CPU | 315-4PN33 | GB | 14-43 52