315-4PN33

5.7 Setting standard CPU parameters
5.7.1
Parameterization via Siemens CPU
Since the CPU is to be configured as Siemens CPU 315-2 PN/DP
(6ES7 315-2EH13-0AB0 V2.6) in the Siemens hardware configurator,
the standard parameters of the VIPA CPU may be set with "Object
properties" of the CPU 315-2PN/DP during hardware configuration.
Via a double-click on the CPU 315-2 PN/DP the parameter window of
the CPU may be accessed. Using the registers you get access to
every standard parameter of the CPU.
5.7.2 Parameters CPU
The CPU does not evaluate each parameter, which may be set at the
hardware configuration. The parameters of the following registers are
not currently supported: Synchronous cycle interrupt, Communication
and Web.
The following parameters are supported by the CPU at this time:
n Short description: The short description of the Siemens CPU
315-2EH13 is CPU 315-2 PN/DP.
n Order No. / Firmware: Order number and firmware are identical to
the details in the "hardware catalog" window.
n Name: The Name field provides the short description of the CPU.
If you change the name the new name appears in the Siemens
SIMATIC Manager.
n Plant designation: Here is the possibility to specify a plant desig-
nation for the CPU. This plant designation identifies parts of the
plant according to their function. Its structure is hierarchic
according to IEC 1346-1.
n Location designation: The location designation is part of the
resource designation. Here the exact location of your module
within a plant may be specified.
n Comment: In this field information about the module may be
entered.
Parameterization via
Siemens CPU
315-2EH13
Supported parameters
General
VIPA System 300SDeployment CPU 315-4PN33
Setting standard CPU parameters > Parameters CPU
HB140 | CPU | 315-4PN33 | GB | 14-43 44