315-4PN33

When a memory card has been installed, the write command stores
the content of the RAM as S7PROG.WLD on the memory card. The
write command can be found in the Siemens TIA Portal in the Task
card "Online tools" in the command area at "Memory" as button [Copy
RAM to ROM]. The MC LED blinks during the write access. When the
LED expires, the write process is finished. If this project is to be
loaded automatically from the memory card with PowerON, you have
to rename this to on the memory card to AUTOLOAD.WLD.
After accessing the memory card you can find a diagnostics entry in
the CPU. To monitor the diagnostics entries, you select Online &
Diagnostics in the Siemens TIA Portal. Here you can access the
"Diagnostics buffer".
Ä Chapter 5.18 ‘VIPA specific diagnostic entries’
on page 65
Transfer CPU
®
Memory card
Checking the transfer
operation
VIPA System 300S Configuration with TIA Portal
TIA Portal - Project transfer
HB140 | CPU | 315-4PN33 | GB | 14-43 161