315-4PN33

This function is supported only if the PROFINET IO controller is not
yet configured. You get valid IP address parameters from your
system administrator. The assignment of the IP address data hap-
pens online in the Siemens SIMATIC Manager starting with version V
5.3 & SP3 with the following proceeding:
1. Start the Siemens SIMATIC Manager.
2. Switch to "TCP/IP -> Network card .... " using ‘Options
è Set PG/PC interface è
’.
3. Open the dialog for initialization of a station with ‘PLC
è Edit Ethernet node’.
4. To get the stations and their MAC address, use the [Browse]
button or type in the MAC address. The Mac address may be
found at the front of the CPU.
5. Choose if necessary the known MAC address of the list of found
stations. To check this with [Blink] you may cause the MT LED
to blink.
6. Either type in the IP configuration like IP address, subnet mask
and gateway. Or your station is automatically provided with IP
parameters by means of a DHCP server. Depending of the
chosen option the DHCP server is to be supplied with MAC
address, equipment name or client ID. The client ID is a numer-
ical order of max. 63 characters. The following characters are
allowed: Hyphen "-", 0-9, a-z, A-Z
7. Confirm with [Assign IP configuration].
Directly after the assignment the PROFINET IO controller is online
reachable using the set IP address data.
Since the IP address data, which were assigned here, are
deleted at PowerOFF, you have to take them to a project
by means of the hardware configuration, which is
described next.
Initialization of the Ethernet PG/OP channel
8.6 Hardware configuration - CPU
The configuration of the CPU takes place at the Siemens ‘hardware
configurator’ . The hardware configurator is part of the Siemens
SIMATIC Manager. It serves for project engineering. The modules,
which may be configured here are listed in the hardware catalog. If
necessary you have to update the hardware catalog with ‘Options
è Update Catalog
’.
For project engineering a thorough knowledge of the Siemens
SIMATIC Manager and the Siemens hardware configurator is
required.
Assign IP address
parameters
Precondition
VIPA System 300SDeployment Ethernet communication - PROFINET
Hardware configuration - CPU
HB140 | CPU | 315-4PN33 | GB | 14-43 134