315-4PN33

Please always use the CPU 315-2 PN/DP (6ES7
315-2EH13-0AB0 V2.6) from Siemens of the hardware
catalog to project this CPU from VIPA. For the project
engineering, a thorough knowledge of the Siemens
SIMATIC Manager and the hardware configurator from
Siemens is required!
The CPU has an integrated memory. Information about the capacity
of the memory may be found at the front of the CPU. The memory is
divided into the following parts:
n Load memory 512kbyte
n Code memory (50% of the work memory)
n Data memory (50% of the work memory)
n Work memory 512kbyte
The CPU has an integrated PROFINET IO controller which is to be
configured via the PROFINET sub module in the hardware configu-
rator from Siemens.
The CPU has an Ethernet interface for PG/OP communication. After
assigning IP address parameters with your configuration tool, via the
"PLC" functions you may directly access the Ethernet PG/OP channel
and program res. remote control your CPU. You may also access the
CPU with a visualization software via these connections.
Access
Memory
Integrated PROFINET IO
controller
Integrated Ethernet PG/
OP channel
VIPA System 300S Basics
CPU 315-4PN33
HB140 | CPU | 315-4PN33 | GB | 14-43 13