315-4PN33

The working surface of the diagnostic tool has the following structure:
n The ‘navigation area’ at the left side contains the hierarchical
listed diagnostic objects. Depending on CP type and configured
connections there is an adjusted object structure in the navigation
area.
n The ‘information area’ at the right side always shows the result of
the navigation function you chose in the navigation area.
A diagnostic always requires an online connection to the CP you want
to control. For this click at the symbol bar.
The following dialog window appears:
Set the following parameters at destination station:
n Attachment...:
Ind. Ethernet TCP/IP
n Node addr.:Enter the IP address of the CP
n Rack/slot: For the VIPA PROFINET IO controller please enter 0
for module rack and 125 as slot. Set your PG/PC interface to
"TCP/IP -> Network card .... ". Via [OK] you start the online diag-
nostic.
Structure
No diagnostic without
connection
VIPA System 300SDeployment Ethernet communication - productive
NCM diagnostic - Help for error diagnostic
HB140 | CPU | 315-4PN33 | GB | 14-43 126