315-4PN33

2. Choose the connection partner and the type of connection and

confirm with [OK].

If activated, a properties dialog for the according connection

opens as link to your PLC user program.

3. After every connection was configured by this way, you may

save and compile your project and exit NetPro.

Exclusively Siemens S7 connection may be configured with NetPro.

All broadcast stations and All multicast stations are not

supported by this CPU.

n For data transfer with Siemens S7 connections the FB/SFB VIPA

handling blocks are necessary; the deployment is described in the

manual "Operation list" of your CPU.

n At Siemens S7 connections the communication connections are

specified by a connection ID for each communication partner.

n A connection is specified by the local and partner connection end

point.

n At Siemens S7 connections the TSAPs must be congruent cross-

wise. The following parameters define a connection end point:

The following parameters define a connection end point:

Station A Station B

remote TSAP

Siemens

S7 connection

local TSAP

ß ß

remote TSAP

ID A ID B

Connection types

Siemens S7 connection

VIPA System 300S Deployment Ethernet communication - productive

Configure Siemens S7 connections

HB140 | CPU | 315-4PN33 | GB | 14-43 119