User's Manual


 
 ' () *'(+
1. Please set “ACPI Suspend Type” at “Power Management Setup” from BIOS to
S3(STR) mode, and save the setting.
2. Since default setting of Power Management within Windows 98 is APM
(Advanced Power Management) mode, you must change it to ACPI (Advanced
Configuration and Power Interface) mode at          in order to
have STR function.
3. When you installing Windows 98, please use following command to add ACPI
function in to Windows 98.
SETUP /P J
NoteYou can find ACPI mode under “System Device” of “Device Manager”
after you installed Windows 98.
4. After you have successfully installed Windows 98, please install your VGA,
INF, and SOUND driver.
5. You can then choose “STAND BY” from the “SHUT DOWN” option under
“START” to get into STR mode.
-To wake up your system, please press Power Button to power on and wait 9~12
seconds to return back original Windows 98 screen.







