Instructions / Assembly

P.3 P.3
RTA-TSF65C
Turn over the seat B and assemble the armrests G-L, G-R in their respective
sides with screws M. Please note that the armrest side (left or right) is you
sitting on the chair, not looking at it.
STEP 1
Hardware
M
M8x25
8
Pcs
M
ASSEMBLY STEPS
First place the felt gaskets N over the 2 holes on the middle of the seat frame B,
then assemble the mechanism D with screws M, making sure the tension knob
faces towards the front.
B
STEP 3
B
RIGHT
G-R
LEFT
G-L
(Front)
(Front)
(x8)
(x2)
(x4)
M
STEP 2
Hardware
M
M8x25
4
Pcs
N
Felt Gasket
2
Pcs
N
D
D
(Front)
Join the base parts to the seat making sure
the tip of the lift E enters correctly into the
hole of the mechanism D.
STEP 4
Insert the casters F into each
leg of the base C using
pressure, then place the lift
cylinder E in the middle of the
base and cover it with H.
F
C
E
E
H
B