GAMING CHAIRS ASSEMBLY INSTRUCTIONS REV.ZK-7369-0523 SERIES Echo MODELS TSF44 TS42 Lux TSF45 GG TS51 TS43 ProGamer2 TS90 TS92 GameMaster TS83 Cow Print TS85 Pastel TS86 Gamer XL TSXL3 (General representation of our gaming chairs.
P.1 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 For Support, assembly questions Do a quick inventory & Replacement Parts within the of all the parts and hardware listed below. 48 Contiguous United States: Please email us at: support@technisportusa.com P.1 Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.
P.2 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 P.2 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit is completely assembled. • Please read the assembly instructions throughly and follow step by step. • Make sure you understand which hardware will be used on each step.
P.3 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 P.3 ASSEMBLY STEPS STEP 1 Hardware M8x20 4 Pcs O-ring 4 Pcs Washer 4 Pcs Felt gasket 4 Pcs L O P Q Flip over the seat B and place the felt gaskets Q over the innermost holes in the middle and back of the frame. Place the mechanism D over the felt gaskets, making sure its tension knob faces towards the FRONT.
P.4 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 STEP 4 STEP 5 Join the base parts to the seat making sure the tip of the lift E enters correctly into the hole of the mechanism D. Hardware M8x25 4 Pcs O-ring 4 Pcs Washer 4 Pcs M O P P.4 Assemble the backrest A to the metal brackets on the seat B with screws M, O-rings O and washers P, making sure the O-ring go in the middle of the hardware set.
P.5 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 P.5 CHAIR'S FUNCTIONS 1 2 3 4 ! 5 To raise or lower the chair’s height, pull UP the lever that is under the seat on the right side. The chair goes down while sitting on it, or up if you lift your body. The chair also tilts by pulling OUT the same lever to unlock, but please note that unlike regular chairs, gaming chairs have their balance centered farther back, so the chair feels harder to tilt.
P.6 TS42, TS43, TS51, TS83, TS85, TS86, TS90, TS92, TSF44, TSF45, TSXL3 P.6 TECHNI SPORT WARRANTY Gaming Chair: 2-YEAR WARRANTY Gaming Desk: 5-YEAR WARRANTY Gaming Chair Internal Metal Frame*: LIFETIME WARRANTY RTA Products, LLC has warranted the Techni Sport products to the original purchaser who acquired a new product from RTA Products or its authorized re-sellers of the product against defects in material or workmanship.
