Instructions / Assembly

P. 8
RTA-TS201
P. 8
Place t
he support
hooks
17
into the monitor structures 10, then assemble
the monitor structures 10 to the monitor panels 11 using screws A as
shown.
STEP 7
Hardware/tools:
A
M6x12
2
Pcs
C
M6x25
2
Pcs
D
M6x35
1
Pc
(This view shows the unit from the front)
Pay attention to the correct screws that will need to be used. To
avoid misalignments, first place all the screws loosely.
Working with the frame facing towards the front, and with the help of
another person, place the main panel 12 over it making the holes
coincide. Then screw loosely using the following screws:
A: For the front holes.
C: For the back holes.
D: For the center hole.
Once all the screws are in place, proceed to tighten them.
12
3
2
1
A
D
A
C
C
PAY ATTENTION TO
THE CORRECT SCREWS
YOU HAVE TO USE
10
X4
17
X4
STEP 8
Hardware/tools:
A
M6x12
8
Pcs
10
11
10
11
(The wider side goes at the back)