Instructions / Assembly

 Before you start assembling, make sure that you have all the parts and hardware by
doing a quick inventory. The unit might or not include all the necessary tools.
 Read first the instructions and analize all illustrations before starting the assembly.
 Follow the assembly instructions step by step and do not skip any. If you find an
issue when doing a step, please contact customer service for assistance.
 On each step, and to avoid misalignments, always leave the screws loose, and
do not tighten them untill all screws are in place.
 If there are no visible holes in wood panels: The laminate might be covering them.
Pass the tip of your finger around the area where the hole should be located, and
press against the surface to feel the indentation.
 Make sure to use the correct size of screws or bolts on a part, and avoid overtighten
them. Using wrong screws or overtighten them might cause damage to the screw, the
hole’s threading, or the parts.
HOW TO ASSEMBLE PARTS USING CAM BOLTS AND CAM LOCKS:
P.4
RTA
-
TS200
GENERAL ASSEMBLY TIPS AND TROUBLESHOOTING DURING ASSEMBLY:
P.4