Instructions / Assembly

P.8
RTA-S06
P.8
• Attach the bolts A to panels 14 and 15 into the indicated holes.
• Check and make sure the cam
locks on panel 16 are aligned and
ready to receive the bolts, just as explained in page 4.
• Join panels 14 and 15 to panel
16 and turn the cam locks.
(Top)
(Front)
(Front)
(Back)
STEP 6
Hardware:
A
M6x40
Bolt
4
Pcs
15
14
16
Cam locks
alignment on 16:
FIRST:
THEN:
Assemble the “Flat” sliders 12 to the side panels 14 and 15 with screws
C. Please note:
• The wheel is at the front, and faces
down with 2 holes above it.
• The sliders attach at the front on the 2nd hole.
• The grooves on the panels are located at the back.
STEP 5
Hardware:
C
M3x15
8
Pcs
14
12
15
(Top)
(Back)
(Front)
The groove goes at
the back of panels
2nd hole from front
(Front)
Wheel at front,
2 holes above it
(Back)
(Front)
(Back)
14
15
(Top)