Instructions / Assembly

ASSEMBLY STEPS
P.6
RTA-S06
P.6
• Slide the metal fittings through the metal bar 23E in the following
exact order:
- One of 23A with the flat side UP.
- Both 23C facing UP.
- The second 23A with t
he flat side UP.
• Align the pieces 23C in between the marks on the bar 23E, and insert
the tiny screws 23F into 23C and tighten to leave 23C stationary
within those marks.
STEP 2
Hardware:
FIRST INSERT:
THEN TIGHTEN 23C:
(Top)
(Bottom)
23A
23A
23C
23C
23F
23F
23C
23C
Attach the casters 3 to the bottom surface of panel 16 with screws E as
indicated:
•
The locking casters 3L go at the FRONT of the panel.
• The non-locking casters 3N go at the BACK.
STEP 1
Hardware:
E
M4x14
16
Pcs
(Front)
16
LOCKING
go at the front
NON-LOCKING
go at the back
3N
3L
16
16
TOP surface:
BOTTOM surface:
23A go with flat side facing UP.
THEN ALIGN 23C:
23E
23E
(Top)
(Bottom)