Instructions / Assembly

Slide the bottom panel 5
through the grooves of the side panels and
into the front panel as shown.
Insert the file tubes 11
through the corresponding hole on panel
10 and screw into panel 9, but
DO NOT
OVERTIGHTEN
to avoid accidental
damage humps or perforation.
STEP 21
Hardware:
B
M4x35
4
Pcs
7
5
8
STEP 20
8
10
7
Assemble the back panel
10 to the side panels 7
and 8 with screws B.
STEP 22
10
11
9
Assemble the handle 13
to front panel 9 with
screws D.
9
13
P.13
RTA-S06
P.13
STEP 23
Hardware:
D
M4x20
2
Pcs
(Top)
(Bottom)
Holes to use
for LETTER
files (U.S.):
Holes to use
for A4 files:
8
7
Flip the drawer upside-down and assemble the “L” sliders 12 with screws
C, making sure the wheel goes towards the back, and that they don’t
protrude, otherwise, the drawer raises 1” and won’t fit in the cabinet.
STEP 24
Hardware:
C
M3x15
4
Pcs
12
When finished, the sliders
should look like this from the
back of the drawer:
The assembly below is
incorrect, it raises 1” and the
drawer won’t fit:
(Top)
(Bottom)
9
12