Installation Manual

1ST: Join the 2 sections that were assembled in steps 8 and 13 as shown.

2ND: Align and insert the cam locks (B) into panels (9) and (10), then turn

them to lock the 2 sections together as explained in PAGE 4.

3RD: Cover the cam lock holes with (G).

4TH: Attach the nail studs (F) at the bottom of panels (9) and (10) as shown.

RTA-BC19

P.12

2nd

3rd

1st

4th

☛ KEEP THE UNIT LAYING DOWN ON THE FLOOR FOR THE NEXT STEP.