Instructions / Assembly

MAIN PARTS LAYOUT (FOR REFERENCE):
3
57$%
3
SCREWS LIST:
12
13
14
16
8
1
2
7
5
9
18
11
15
10
10
֊ This unit uses cam bolts and locks. The following explains how to use them.
This is not an assembly step; it is a guide for when you are actually doing the assembly using this
kind of hardware.
1. Screw the bolt into the
corresponding panel.
2. In the other panel, insert the
cam lock and align it so it can
properly receive the bolt, then join
both panels (the cam locks might
come pre-installed in this unit).
3. The panels might have a very
small gap which is normal; turn the
cam lock clockwise to lock the
parts together and the gap will also
close.
Cam Bolt
Cam Lock
ALIGNMENT
DIRECTION