Instructions / Assembly

- First install the grommet (12) into the hole of panel (O) from the inside, then assemble the

main panel (A) to panels (I), (J) and (O) using screws (9) as shown.

- First install and align the cam locks (3) into panels (B), (C), (D) and (H), and assemble the

main panel (A) as shown and as explained in page 4. Then attach the caps (10) to the cam

locks on panels (B). Finally, secure the L Bracket (16) to the underside of main panel (A) using

screw (7) as shown.

The panels from previous

step are shown here

laying down showing the

underside

Main panel (A)

shown from the

underside

(Front)

(Right)