Mid Back Mesh Task Office Chair with Flip Arms MODEL RTA-8050 ASSEMBLY INSTRUCTIONS REV-1-AFSI-7708-1123 Thank you for purchasing our product
RTA-8050 P.1 For Support, assembly questions Do a quick inventory & Replacement Parts within the of all the parts and hardware listed below. 48 Contiguous United States: Please email us at: support@rtaproducts.com P.1 Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.
P.2 RTA-8050 P.2 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit is completely assembled. • Please read the assembly instructions throughly and follow step by step. • Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
RTA-8050 P.3 P.3 ASSEMBLY STEPS STEP 1 Insert the casters F into each leg of the star base C using pressure, then place the gas lift E in the middle of the base and cover it with H. H LAST E SECOND C F STEP 2 Hardware I M6x20 4 Pcs FIRST Assemble the armrests G-L, G-R to the backrest A in their respective sides with screws I. Please note that the armrest side (left or right) is defined when you sit on the chair, not looking at it.
RTA-8050 P.4 STEP 3 Hardware J Assemble the seat B to the armrests GL, GR with screws J. 4 Pcs M6x30 P.4 (Front) Tools (Included) 1 M6 J B (Front) (Front) G-R G-L RIGHT LEFT STEP 4 Hardware I M6x20 4 Pcs Assemble the mechanism D to the seat B with screws I, making sure that the tilt knob faces towards the front.
RTA-8050 P.5 P.5 CHAIR'S FUNCTIONS 1 To raise or lower the chair’s height, pull UP the lever that is under the seat on the right side. The chair goes down while sitting on it, or up if you lift your body. 2 The chair also tilts freely by pulling OUT the same lever to unlock this function. 3 The mechanism under the seat has a tension knob at the front that you can turn either way to apply more or less tension to the tilting function. With less tension, the tilting will feel easier.
P.6 RTA-8050 TECHNI MOBILI WARRANTY TASK/KID'S CHAIR: 1-YEAR WARRANTY RTA Products, LLC has warranted the Techni Mobili office chairs to the original purchaser who acquired a new product from RTA Products or its authorized resellers of the product against defects in material or workmanship. This warranty is expressly limited to the repair or replacement (at its option) of defective chair components or materials that fails under normal use as a result of a defect in materials or workmanship.
