Instructions / Assembly

RTA-739DL

P.16 P.16

STEP 17

Hardware

M5x42

Pcs

Tools (included)

For each of the 3 drawers, assemble the front panel 22 to panels 23

and 24 with bolts A and cam locks B as explained in page 6. Please

note that the bottom panel 26 will enter into the groove of panel 22.

For each of the 3 drawers, flip them upside-down and assemble the “L”

shaped sliders 27 with screws D, making sure the wheel goes towards

the back, and that they don’t protrude, otherwise, the drawer raises 1”

and won’t fit in the cabinet.

Insert the drawers into the cabinet, starting with the bottom one, them

middle, then top. Insert and an angle with their fronts facing down,

making sure the wheels from the drawer slide in the middle of the sliders

inside the cabinet.

If you install as below,

the drawer raises 1"

and won't fit in the unit.

When finished, the sliders

look like this:

Sliders

(Top)

(Bottom)

STEP 18

Hardware

M3.5x14

Pcs

Tools (included)

STEP 19

On the left side:

On the right side:

(Front)

(Back)