Instructions / Assembly

B
C
RTA-739DL
P.14
• THEN, and with the help of another person, carefully place the left tabletop
14 over the frame, making sure the bolts and dowels connect into the
corresponding holes on these 3 panels.
.
• Insert the cam locks B in panels 18 and 19, and turn them to lock the
tabletop to the side panels as explained in page 6.
• Secure the tabletop 14 to the tubes 5 and 7 with screws H from
underneath, but LEAVE THEM ALL LOOSE
to allow flexibility.
• If the panels require alignment, push/pull/lift to get them as aligned as
possible with minimal gaps between them.
• Please note that the tops might not end up 100% perfectly aligned,
and it should not be of concern unless the difference in levels and
gaps are considerable that will not allow the desk to function properly.
• Proceed to tighten all the screws left loose from step 7 through this
step 13 inclusive.
14
19
18
5
7
P.14
STEP 13
Hardware
4
Pcs
This step
requires of
2 persons
Ø8x40
4
Pcs
Tools (included)
Tools (NOT included)
H
M6x30
4
Pcs
FIRST insert the dowels C into the indicated holes on the side panels
18 and 19.
C
B
Alignment
FIRST!
H
Do not stick
out more
than 10mm
Max.
10mm