Instructions / Assembly

M10
RTA-7310D
Bring the cabinet built in step 2 to the upright position, then with the
help of another person:
• Assemble the tubes 4, 5 and 6 to the middle frame 2 in their
respective positions with screws C.
• Assemble the right frame 3 to the tubes 4, 5 and 6 with screws C.
• Attach the hook 10 to the frame 3 with screw A
• Assemble the support tubes 7 to the top tube 6 on the back of the unit
with screws C from outside and nut caps E from inside.
• Assemble the support tubes 7 to the bottom tube 4 with screws B
from underneath.
Note: If you don’t see holes for the screws on the tubes 4 and 6, review
step 3 for the correct assembly of those tubes.
2
3
4
5
6
A
10
(Front)
(Back)
(Front)
7
6
4
E
C
B
Please pay attention to
the orientation of the
holes on all the tubes
P.6
P.6
STEP 3
Hardware
A
M6x12
1
Pc
C
This step
requires of
2 persons
C
M6x45
6
Pcs
Tools (included)
Scan QR to view step
STEP 4
Hardware
B
M6x30
2
Pcs
C
M6x45
2
Pcs
Tools (included)
Scan QR to view step
from the inside.
C
E
M6
2
Pcs