INDUSTRIAL WRITING DESK MODEL RTA-7310D ASSEMBLY INSTRUCTIONS Thank you for purchasing our product Scan QR to view full assembly video REV.
P.1 RTA-7310D • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • Please read carefully the assembly instructions before the installation. • The assembly might require of 2 persons for certain steps. Before you start the instalation, make sure there is someone else nearby to help you. • Scan this QR code to view the complete assembly video online.
RTA-7310D P.2 Do a quick inventory of all the parts and hardware listed below Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual. P.2 The replacement parts service is limited to the 48 contiguous United States. If you reside in AK, HI, PR, U.S. territories or other countries, please contact the supplier from where the unit was purchased.
RTA-7310D P.3 P.3 MAIN PARTS LAYOUT (For reference) 14 8 9 13 8 6 12 5 7 10 12 1 2 4 11 HARDWARE LIST 3 INCLUDED TOOLS 1 Phillips Screwdriver PART QTY SIZE A 1 M6x12 1 M4 Allen Wrench B 28 M6x30 1 M10 Spanner C 10 M6x45 D 16 M3.
P.4 RTA-7310D P.4 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • If during assembly you find an issue or need clarification, please contact our Customer Service for assistance. Please refer to the last pages on this manual. • On each step read the instructions thoroughly and analyze the illustrations before proceeding to do the assembly.
RTA-7310D P.5 P.5 ASSEMBLY STEPS STEP 1 Hardware B M6x30 Assemble the first left shelf 12 to the middle bars on the frames 1 and 2 with screws B from underneath. 4 Pcs Tools (included) 1 Scan QR to view step 2 (Top) 12 Make sure to place the frame with this hole towards the back of the unit, it is needed for step 3. STEP 2 Hardware B M6x30 4 Pcs Assemble the second left shelf 12 to the bottom bars on the frames 1 and 2 with screws B from underneath.
RTA-7310D P.6 STEP 3 This step requires of 2 persons Hardware A C M6x12 1 Pc M6x45 6 Pcs P.6 Bring the cabinet built in step 2 to the upright position, then with the help of another person: • Assemble the tubes 4, 5 and 6 to the middle frame 2 in their respective positions with screws C. • Assemble the right frame 3 to the tubes 4, 5 and 6 with screws C. • Attach the hook 10 to the frame 3 with screw A from the inside.
RTA-7310D P.7 STEP 5 Hardware C M6x45 2 Pcs P.7 Assemble the top shelf support tubes 8 to the shelf horizontal tube 9 with screws C. Tools (included) 8 Please pay attention to the orientation of the holes on the tubes Scan QR to view step 9 8 STEP 6 Hardware B M6x30 Assemble the tubes 8 and 9 to the top shelf panel 14 with screws B.
RTA-7310D P.8 STEP 8 This step requires of 2 persons Hardware B M6x30 8 Pcs P.8 With the help of another person, assemble the main panel 13 to the frames 1, 2 and 3 and to the tubes 5 and 6 with screws B from underneath. Note: If you don’t see holes for the screws on the tubes 5 and 6, review step 3 for the correct assembly of those tubes. Tools (included) Scan QR to view step 13 1 6 3 2 5 STEP 9 Hardware D M3.
RTA-7310D P.9 P.9 WEIGHT LIMITS 88 Lbs (40 Kg) 44 Lbs (20 Kg) 66 Lbs (30 Kg) 2.2 Lbs (1 Kg) 44 Lbs (20 Kg) WARNINGS Do not exceed the indicated weight limits. Do not expose the surfaces to direct sunlight or to extreme environmental conditions. Do not use solvents or abrasive materials to clean the unit. Do not sit on the unit or lean against it. Do not allow small children to play under or over the unit. Do not allow small children to play with the CPU cart as a moving vehicle.
P.10 RTA-7310D TECHNI MOBILI WARRANTY DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein. "Defects" as used in this warranty, is defined as any imperfections that impair the use of the furniture or product.
Your satisfaction is very important to us. Our Support agents can help you with any issues you may have, please feel free to contact us with any questions you have about our products, or to request replacement parts. FOR ADDITIONAL INFORMATION PLUS HELP OPTIONS VISIT: WWW.TECHNIMOBILI.COM CLICK ON SUPPORT TAB Or scan the following QR Code: EMAIL US: support@rtaproducts.