Instructions / Assembly

P. 1 4
RTA-482BC
P. 1 4
• Once you have selected the place against the wall where the unit will
go, with the help of another person bring the unit closer to the wall,
and calculate the 2 points on the wall where the anchor device G will
be installed, which should be no more than 1 inch away from the top
corners of the unit.
• Mark the points on the wall and with the appropriate tools make a hole
to install the anchors from the kit G.
• Attach the brackets from the kit G to the anchors with the screws that
come in the same kit.
• Use the tie downs from the kit G to secure the frame to the brackets.
Securing
the unit to the wall prevents accidents from tip-overs.
• Cover all the cam locks on panels 6 and 9 with stickers 20.
(Wall)
20
STEP 17
Hardware:
G
1
Set
20
2
Pcs
(Wall)
Hardware:
G
G
(Wall)
6
6
9
9
20