English MODEL RTA - 4804L Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference.
Spanish INSTRUCCIONES DE ENSAMBLAJE. MODELO RTA - 4804L Gracias por comprar uno de nuestros productos. Por favor lea cuidadosamente las instrucciones de ensamblaje antes de instalar la unidad. Por favor guarde este manual para referencias futuras.
RTA-4804L DIMENSIONS MAXIMUM WEIGHT CAPACITIES TABLETOP 100Lbs TOP DRAWER 22Lbs MIDDLE DRAWER 22Lbs BOTTOM DRAWER 22Lbs DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface
RTA-4804L PARTS LIST P.
RTA-4804L P.
RTA-4804L 37A 37B P.6 37D 37C 37 38 37E 37F 37G X2Pcs A,B,C-Metal Plates; D-Lock and Key; E-Metal Bar; F-Screws for 37C; G-Metal Ring A,B,C-Metales de cerrojo; D-Cerrojo y llave; E-Barra de cerrojo; F-Tornillo para 37C; G-Aro de metal SCREWS LIST PART QTY. Connect Metal Plate Plato metálico de conexión TORNILLOS ITEM PART QTY.
RTA-4804L P.
RTA-4804L P.
RTA-4804L P.
RTA-4804L Steps P.10 Pasos 1 21 21 29 37B 37B 37B Use Screws (A) to fix the Metal Plates (37B) to the Small Drawer Left Panels (21) and the File Drawer Left Panel (29). Use tornillos (A) para fijar las partes (37B) a los Paneles Izquierdos de las gavetas pequeñas (21) y el Panel Izquierdo de la Gaveta de Archivo (29). SCREWS TORNILLOS A 3X15 MM 6PCS 2 37D 23 37G Press the Metal Ring (37G) into the hole of the Top Drawer Front Panel (23) from the face of the panel.
RTA-4804L P.11 3 22 22 21 21 24 23 25 25 22 22 Screw Bolt (B) to the back of the Top Drawer Front Panel (23) and the Middle Drawer Front Panel (24). Place the Small Drawer Left & Right Panels (21&22) over the Bolts (B) and secure the Panels (21&22) by turning their cam locks. Slide down the Small Drawer Bottom Panels (25) between the Left, Right, and Front Panels (21, 22, 23), making sure it fits into the grooves.
RTA-4804L P.12 Derecho 5 Right Derecho 27 Right Izquierdo 27 Left 27 27 Left 21 Izquierdo SEPARATE THE SLIDERS (27) BY THEIR SHAPE: THE “L” SHAPE ONES WILL BE USED IN STEP #5, AND THE FLAT ONES IN STEP #17. Derecho Right Izquierdo 27 Left SEPARE LOS DESLIZADORES (27) DE ACUERDO A SU FORMA: LOS QUE TIENEN FORMA “L” SE USARÁN EN EL PASO #5, Y LOS PLANOS EN EL PASO #17.
RTA-4804L P.13 7 35 28 35 31 Use Screws (A) to fix the Folder Hangers (35) to the File Drawer Front & Back Panels (28&31). Use tornillos (A) para ensamblar los Colgadores de la Gaveta de Archivo (35) a los paneles (28 & 31). SCREWS TORNILLOS A 3X15 MM 6PCS 8 30 29 28 Screw Bolts (B) to the back of the File Drawer Front Panel (28). Place the File Drawer Left & Right Panels (29&30) over the Bolts (B) and secure the Panels (29&30) by turning their cam locks.
RTA-4804L P.14 9 Slide down the File Drawer Bottom Panel (36) between the Left, Right, and Front Panels (28, 29 & 30), making sure it fits into the grooves. 36 30 Deslice los Paneles Inferiores de la Gaveta de Archivo (36) entre los Paneles Izquierdo, derecho y Frontal (28, 29 & 30), asegurándose que quede entre los canales. 29 10 Use Screws (H) to fix the File Drawer Back Panel (31) to the File Drawer Left & Right Panels (29&30).
RTA-4804L P.15 12 34 2 Palanca de cerradura Corredara interna Corredara externa 34A 34B Open the slider (34) and hold it as shown. Press the locking lever up hard with the tip of your thumb to separate sliders into the outer rail (34a) and the inner rail (34b). (34b) will be used on step# 13, and (34a) on step# 17. Abra el deslizador (34) y sosténgalo como se muestra. Presione fuerte la palanca de cierre hacia arriba con la punta del dedo para separar los deslizadores en partes (34a) y (34b).
RTA-4804L P.16 15 37F Tighten the metal plates on the marked position of the metal bar 37F Apriete las piezas entre la posición marcada en la barra 37E 37A 37F 37C First slide into the Metal Bar (37E) the 5 Metal Plates in the order shown in the drawing (37A, 37C, 37C, 37A, 37C). Then, tighten the Metal Plates (37C) on the marked position of the Metal Bar (37E) with Screws (37F). Primero deslice en la Barra de Metal (37E) las 5 piezas metálicas en el orden mostrado (37A, 37C, 37C, 37A, 37C).
RTA-4804L P.17 17 34A 27 Frente Izquierdo Left 27 X2 1 34A Derecho Right 27 X2 2 34A Use Screws (A) to assemble the Small Drawer Sliders (27) and the Outer Rails (34A) to the Left & Right Panels (1&2). On (27), use the second hole from the front, and third hole from the end. On (34A), use the second and fifth hole from the end. Do not screw (34A) at the front yet.
RTA-4804L P.18 19 3 2 1 First screw the Bolts (B) on the inside face of the Left & Right Panels (1&2). Place the Back Panel (3) over the Bolts and tighten all cam locks on the inside face of Back Panel (3). Primero atornille los pernos (B) en la parte interior the los Paneles Izquierdo y Derecho (1 & 2). Coloque el Panel Posterior (3) sobre los pernos y gire todos los cerrajes de la parte interior del Panel Posterior (3).
RTA-4804L P.19 21 7 Screw the Bolts (B) in the corresponding holes of the back face of the Bottom & Top Panels (4&7). Then place the Left & Right Panels (1&2) over the bolts of the Bottom Panel (4). Then insert the bolts of the Top Panel (7) into the holes of the Left & Right Panels (1&2). Finally tighten the cam locks in the inside faces of the Left & Right Panels (1&2). 2 1 Atornille los pernos (B) en los hoyos correspondientes en la parte posterior de los Paneles Superior e Inferior (4 & 7) .
RTA-4804L 23 P.20 Insert the Right Connect Tubes (12) into the Left Front Connect Tube (10) and Left Back Connect Tube (11). Use Screws (D&J) to tighten them. Inserte los Tubos de Conección Derecho (12) en el Tubo frontal de Conección Izquierdo (10) y el Tubo Posterior de Conección Derecho (11). Use tornillos y tuercas (D & J) para asegurarlos.
RTA-4804L P.21 A1 8 9 10 11 12 Use Screws (E) to fix the Left Front Connect Tube, Left Back Connect Tube and Right Connect Tube (10, 11&12) to the Left & Right Frames (8&9). Please pay attention to the position of the tubes as shown. Use tornillos (E) para ensamblar el Tubo Conector Frontal de la Izquierda, el Tubo posterior de conección derecho y el Tubo Conector derecho (10, 11 & 12) a las estructuras Izquierda y Derecha (8 & 9).
RTA-4804L P.22 A3 17 17 10 18 SCREWS TORNILLOS G 6X40 MM 4PCS Use Screws (G) to assemble the Long Tubes (17) between the Left Front Connect Tube (10) and the Support Frame (18). Use tornillos (G) para ensamblar los Tubos Largos (17) entre el Tubo frontal de conexión izquierdo (10) y la Estructura de soporte superior (18).
RTA-4804L P.23 A5 19 20 38 X2 Assemble the Connect Metal Plates (38) on the bottom and between the Corner Table Panel (19) and the Big Table Panel (20) using Screws (K). Ensamble los Platos Metálico de Conexión (38) por debajo y entre medio del Panel de Mesa Esquinero (19) y el Panel de Mesa Grande (20) usando tornillos (K).
RTA-4804L P.24 A7 B1 9 8 10 11 12 Use Screws (E) to fix the Left Front Connect Tube, Left Back Connect Tube and Right Connect Tube (10, 11&12) to the Left & Right Frames (8&9). Please pay attention to the position of the tubes as shown. Use tornillos (E) para ensamblar el Tubo Conector Frontal de la Izquierda, el Tubo posterior de conección derecho y el Tubo Conector derecho (10, 11 & 12) a las estructuras Izquierda y Derecha (8 & 9).
RTA-4804L P.25 B2 9 8 J E 13 E 11 D 12 J D SCREWS 14 Assemble the Right Support Structure (13) to the Right Frame (9) and Left Back Connect Tube (11) using Screws (D, E, J). Assemble the Left Support Structure (14) to the Left Frame (8) and Right Connect Tube (12) with using Screws (D, E, J). Please pay attention to the position of the screws. Ensamble la Estructura de Soporte Derecha (13) a la Estructura Derecha (9) y el Tubo Posterior de Conexión Derecho (11) usando tornillos (D, E, J).
RTA-4804L B4 P.26 19 16 20 7 9 8 F Assemble the Small Table Panel (16), the Corner Table Panel (19) and the Big Table Panel (20) using Screws (D&F). DO NOT TIGHTEN ANY SCREWS UNTILL ALL ARE IN PLACE. Please pay attention of the position of the screws. Ensamble el Panel de mesa pequeño (16), Panel de Mesa Esquinero (19), y el Panel de Mesa Grande (20) usando tornillos (D & F). NO APRIETE NINGUN TORNILLO HASTA QUE TODOS ESTÉN COLOCADOS.
RTA-4804L P.27 B6 23 24 28 1st Inner silver ball bearing slide HUMP Make sure inner silver ball bearing slide is at the front of the slide mount and in lock position(over the hump), as shown. Asegúrese que las balineras estén hacia el frente como se muestra. 2nd Align both sides of slide runners to slide mounts' openings,then slide all the way in.Apply small force to insert completely if needed Alinee los deslizadores en ambos lados y deslice lenta y firmemente.
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL. - PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE REMOVED FROM THE PRODUCT.
