Instructions / Assembly
M8x25mm
, x2
ASSEMBLY INSTRUCTIONS FOR CHAIR MODEL
RTA-4602V
PARTS LIST
ATTENTION: Before you begin the assembly,
make sure that all parts are included in good
condition.
ATTENTION:
⚠ Follow the instructions step by step.
⚠
To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
⚠
Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
⚠
Using the wrong size of screws on a part could result in damage to the screw or the part.
A
Seat, x1
B
D
Connectors, x2
E
Washers, x4
F
C
Armrests, x2
H
I
J
M8x60mm,x2
M8x45mm,x2
(Base)
M8x50mm, x2
Allen wrench, x1
Assemble the base(C) to the frame of the seat(A) using:
-Screws(G) and washers(E) at the front,
-Screws(F) and washers(E) at the back as shown.
Pay attention to the correct screws you have to use.
Assemble the armrests(B) to the back using connectors(D)
and screws (H) , assemble the armrests(B) to the seat using
screws (I) as shown.
Pay attention to the correct screws you have to use.
G
Base, x1
(Armrests)
(Armrests)
(Armrests)
(Base)
(Base)
☛
☛
☛
Both arms are the same.
A
C
B
A
I
I
G
F
E
E
Tighten well all the screws before you sit on the chair for the first time.
Both arms
are the same.
☛