Modern Ergonomic Office Chair MODEL RTA-3263C ASSEMBLY INSTRUCTIONS REV-1-AFSI-7708-1123 Thank you for purchasing our product
RTA-3263C P.1 For Support, assembly questions Do a quick inventory & Replacement Parts within the of all the parts and hardware listed below. 48 Contiguous United States: Please email us at: support@rtaproducts.com P.1 Replacement Parts for International Customers & AK-HI-PR orders: RTA Products will replace the part free of charge, while the customer is responsible for shipping costs plus any International local taxes or duties.
P.2 RTA-3263C P.2 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do not discard this manual or any of the packaging material until the unit is completely assembled. • Please read the assembly instructions throughly and follow step by step. • Make sure you understand which hardware will be used on each step. Using the wrong size of screw, bolt or pin might strip the threads or cause damage to the part in which it is being used.
RTA-3263C P.3 P.3 ASSEMBLY STEPS STEP 1 Insert the casters F into the legs of the star base C using pressure, then insert the gas lift E in the middle of the base. E C F STEP 2 Hardware 1 M13 Check if the armrests G-L, G-R flip up smoothly. If they feel too tight or very loose, use the special tool socket wrench to tighten or loosen them.
RTA-3263C P.4 STEP 4 Hardware K L P.4 Assemble the seat B to the armrests G-L, G-R with screws K and washers L. M6x35 4 Pcs Ø8, Ø16 4 Pcs K 1 L 6 B G-R G-L RIGHT LEFT STEP 5 Hardware J L M6x22 4 Pcs Ø8, Ø16 4 Pcs 1 6 Assemble the mechanism D to the seat B with screws J and washers L, making sure that the tilt knob faces towards the front.
RTA-3263C P.5 P.5 CHAIR'S FUNCTIONS 1 To raise or lower the chair’s height, pull UP the lever that is under the seat on the right side. The chair goes down while sitting on it, or up if you lift your body. 2 The chair also tilts freely by pulling OUT the same lever to unlock this function. 3 The mechanism under the seat has a tension knob at the front that you can turn either way to apply more or less tension to the tiltilng function. With less tension, the tilting will feel easier.
P.6 RTA-3263C TECHNI MOBILI WARRANTY EXECUTIVE/MANAGER CHAIR: 2-YEAR WARRANTY RTA Products, LLC has warranted the Techni Mobili office chairs to the original purchaser who acquired a new product from RTA Products or its authorized resellers of the product against defects in material or workmanship. This warranty is expressly limited to the repair or replacement (at its option) of defective chair components or materials that fails under normal use as a result of a defect in materials or workmanship.
