Th anks for purchasing one of our products. Pl ease read carefully the assembly instructions before the installation. Do not discard this manual or any of the packaging material until the unit has been completely assembled.
P.2 RTA-325 P.
P.3 RTA-325 P.
P.4 RTA-325 P.
P.5 RTA-325 P.5 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. • Do a quick inventory to make sure the product contains all the parts and hardware. • Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the CONTACT card included with the product. • The replacement parts service is limited to the continental United States. If you reside in Hawaii, Puerto Rico, U.S.
RTA-325 P.6 P.6 TO P P FRONT FRONT TO Screw the Bolts (B) to the corresponding holes on the inside face of the Cabinet Top Panel (11), then assemble it to the panels (7 & 8) by turning all the corresponding cam locks as shown.
RTA-325 P.7 FRONT PLEASE REFER TO PAGE 4 TOP FRONT (Parts from step 5 shown here upside-down) FRONT TOP P.
RTA-325 P.8 P.
RTA-325 P.9 P.
P.10 RTA-325 (Normal view) P.
RTA-325 P.11 FR ON T PLEASE REFER TO PAGE 4 P.
RTA-325 P.12 P.
P.13 RTA-325 P.
P.14 RTA-325 P.14 DONE! Before you start using the unit, make sure that all the screws, bolts, cam locks, etc. are properly tightened, and read all the warnings in the next page.
RTA-325 P.15 P.15 AFTER THE ASSEMBLY IS DONE, PLEASE READ CAREFULLY THE FOLLOWING CARE AND MAINTENANCE WARNINGS: WEIGHT LIMITS • Do not exceed the indicated weight limits. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions. • Clean the surfaces preferable with a clean cloth damped in a solution of mild soap and water, then dry with a clean towel. • Do not use solvents or abrasive materials to clean the unit.
