Installation Manual

P.9
Use Screws (D) to assemble the Short Tube (5) and
Long Tube (6) to the CPU Panel (4) with the plastic
washers (M) in between the tubes and the panel. Then
screw the Stud (3) to the short Tube (5). Please follow
the illustration for the correct assembly order and
orientation of the parts.
Use Screws (E) to assemble the CPU Panel (4) to
the Left Back Panel (1).
Use Screws (F) to affix the CPU Tube (2) to the Left Back
Panel (1) & CPU Panel (4).
Note: If part (2) seems misaligned, or a little too short/long,
unscrew and loosen panel (4) from panel (1) to allow some
flexibility and this will allow part (2) to reach both holes.
Use Screws (C) to affix the Short Support Tube (13) to the
Main Panel (14).