Installation Manual

P.8
Screws the Bolts (B) to the corresponding holes on the inside face
of Bottom Panel (10), then assemble the Bottom Panel (10) to (7),
(8) & (9) by turning all the corresponding cam locks.
Please pay close attention to the orientation of all the parts as
illustrated.
Assemble the other pair of flat sliders to the inside face of the
Left & Right Side Panels (7&8). The wheels will be located at
the front and facing down.
Use Screws (C) to fix the Long Support Tubes (12) to the
underside of the Bottom Panel (10).
Screw the Studs (3) to the Long Support
Tubes (12).