Installation Manual

P.7
Grab all the flat shaped Drawer Sliders (23) and set aside the
“L” shaped ones. With the Left & Right Panels (7&8) oriented
as illustrated, assemble one pair of flat sliders (23) to the top
holes on their inside faces. The wheels will be located at the
front and facing down.
Screw the Bolts (B) to the corresponding holes on the inside face of
Top Panel (11), then assemble the Top Panel (11) to the Left & Right
Panels (7&8) by turning all the corresponding cam locks.
First screw the Bolts (B) to the corresponding holes on the inside
face of Right Back Panel (9), then assemble to it the panels (7), (8)
& (11) by turning all the corresponding cam locks. Please pay close
attention to the orientation of all the parts as illustrated.