Installation Manual

P.14
Slide the File Drawer Bottom Panel (27) thru
the channels between panels (24) & (25) as
shown. Make sure the panel fits inside all the
channels.
Assemble the File Drawer Back
Panel (28) to the File Drawer
Left & Right Panels (24&25)
using Screws (L) as shown.
Carefully insert the File Tubes (29) thru the Big Drawer Back
Panel (28) and screw them into the insert of the Big Drawer Front
Panel (26).
WARNING: DO NOT OVERTIGHTEN the tubes as they may perforate
and damage the front panel. Such damage is not covered by the
product's warranty.
Place the big drawer upside-down. Grab the “L” shaped sliders (23)
and assemble them to the drawer using Screws (A), with the wheels
facing towards the back of the drawer. Make sure the sliders are
touching the side panels, and that they are not “up in the air”.
Assemble the Handle (30) to the Big Drawer Front Panel (26) using
Screws (J) as shown.