Installation Manual

P.13
Slide the Small Drawer Bottom Panel (21)
thru the channels between panels (18) & (19)
as shown. Make sure the panel fits inside all
the channels.
Assemble the Small Drawer Back
Panel (22) between the Small
Drawer Left & Right Panels (18&19)
using Screws (L) as shown.
Place the small drawer upside-down. Grab the “L” shaped
sliders (23) and assemble them to the drawer using Screws (A),
with wheels facing towards the back of the drawer. Make sure
the sliders are touching the side panels, and that they are not
“up in the air”.
Assemble the Handle (30) to the Small Drawer Front Panel (20)
using Screws (J) as shown.
Screw Bolts (B) to the holes on the inside face of File Drawer Front
Panel (26), then assemble the File Drawer Left & Right Panels (24&25)
as shown by turning the cam locks.
Left
Right