Installation Manual

P.12
Use Screws (A) to affix the
Metal Fittings (22) to the Left
Back Panel (1).
Use Screw (K) to assemble the Top
Support Tube (32) to the Top Glass (31).
Insert the Top Glass (31) into the Metal Fittings (33), but do not tighten their screws yet. Then, place
the plastic washer (N) in between the Top Tube (32) and the Main Panel (14), and use Screw (I) to
affix the Top Tube. Finally, secure the Top Glass (31) by tightening the screws in the Metal Fittings (33),
but be careful not to overtighten.
Screw Bolts (B) to the holes on the inside face of Small Drawer
Front Panel (20), then assemble the Small Drawer Left & Right
Panels (18&19) as shown by turning the cam locks.