Instructions / Assembly

ManualsBrandsTechni Mobili ManualsDesk ChairsThe TechniMobili Blue High Back Executive Mesh Office Chair with ArmsHeadrest and Lumbar Support

PARTS LIST

ATTENTION: Before you begin to assemble the

product, please make sure that all the parts are

included in the package and in good condition.

ASSEMBLY INSTRUCTIONS

CHAIR STYLE RTA-1008

Insert the casters (F) in the legs of the

base (C) using pressure, then place the

gas lift (E) and the cover (J) in the middle

of the base as shown.

Assemble the backrest (A) to the

mechanism (D) using screws (M) and

washers (N) as shown.

Using screws (K) and washers (N),

assemble the mechanism (D) to the seat

(B) with its knob facing to the FRONT as

shown.

Place the top parts over the base parts

making sure the tip of the gas lift enters

into the hole of the mechanism.

Before seating and using the chair for

the first time, make sure that all

screws are properly tightened.

K+N

M+N

5-Star base

Backrest

Mechanism

Left armrest

Hydraulic

Gas Lift

Casters

Seat

Ø 8x20mm

Ø 6x30mm

Headrest

Base cover

Ø 6x25mm

(Mechanism)

(Mechanism, backrest)

(Armrests, headrest)

ATTENTION:

• Follow the instructions step by step.

• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.

• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.

• Using the wrong size of screws on a part could result in damage to the screw or the part

5 6

Assemble the headrest (H) to the

backrest (A) using screws (J) as shown.

Allen wrench 6mm

Allen wrench 5mm

When you seat on the chair, not looking at it.

Washers

(Backrest)

Right armrest

Flip over the seat (B) with its front

towards you and assemble the armrests

(G) in the respective sides using screws

(J) as shown.

G (Right)

G (Left)

J (x6)

Summary of content (2 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS CHAIR STYLE RTA-1008 PARTS LIST ATTENTION: Before you begin to assemble the product, please make sure that all the parts are included in the package and in good condition.
PAGE 2
CHAIR’S FUNCTIONS: (1) Chair height: Pull UP the lever located under the seat on your RIGHT. The chair goes down while sitting on it, or up if you lift your body. (2) Backrest reclining: Pull UP the lever located under the seat on your LEFT. Recline the backrest and release the lever when the desired position is reached. (3) Reclining tension: Turn the mechanism’s knob in either direction to apply more or less tension to the reclining function.