Instructions / Assembly

P.9
RTA-7050
P.9
STEP 13
Screws:
🅐
M6x35mm
2
Pcs
🅑
Φ8
x30
2
Pcs
1st: Insert the wooden pins Ⓑ in the corresponding holes on panel ②.
2nd: Insert the bolts Ⓐ in the corresponding holes on panel ⑤.
3rd: Insert and align the cam locks Ⓐ in panel ②.
4th: Assemble the panel ⑤ to panel ② as shown and as explained on page 3.
See page 3
(All panels are shown
upside-down)
STEP 14
Screws:
🅐
M6x35mm
2
Pcs
🅑
Φ8
x30
6
Pcs
1st: Insert the wooden pins Ⓑ in the corresponding holes on panels ① and ③ that were
assembled in step 12.
2nd: Insert the bolts Ⓐ in the corresponding holes on panel ①.
3rd: Insert and align the cam locks Ⓐ in panel ⑤.
4th: Assemble the panel ② to the panels ③, and the panel ⑤ to the panel ① as shown
and as explained in step 3.
See page 3