Instructions / Assembly

P.7

RTA-7050

P.7

Assemble the drawer back panel ⑰ to the side

panels ⑮ and ⑯ using screws Ⓓ as shown.

STEP 7

Screws:

🅓

ST3.5x40

Pcs

STEP 10

Screws:

🅔

ST3x14

Pcs

STEP 8

Insert the drawer bottom panel ⑱ thru

the groves of side panels ⑮, ⑯ and

⑰ .

STEP 9

Screws:

🅐

M6x35mm

Pcs

See page 3

1st Insert the bolts Ⓐ in the corresponding holes on the drawer front panel ⑭.

2nd: Insert and align the cam locks Ⓐ in the side panels ⑮ and ⑯.

3rd: Assemble panel ⑭ to panels ⑮ and ⑯ as shown and as explained on page 3.

REPEAT STEPS T THROUGH 10 FOR THE SECOND DRAWER

With the drawer assembled in the previous step upside-down, assemble the “L” shaped

sliders ⑲ using screws Ⓔ as shown, making sure the wheel goes towards the back and

the sliders don’t protrude at the bottom.

VERY IMPORTANT!

INCORRECT:

Raises the

drawer 1” and

won’t fit in unit!

CORRECT:

Sliders don’t

protrude on

the bottom of

the drawer

(Front)

(The groves face

down towards the

bottom on all panels)

(Front)