Instructions / Assembly

St3x14mm 16
⌀25 (felt) 10
⌀22 (laminate) 8
M6x35mm 26
⌀8x30mm 34
St7x58mm 16
St3.5x40mm 8
1. Screw the bolt in the
corresponding panel.
2. In the other panel, insert and
align the cam lock so it can receive
the head of the bolt.
3. Join the panels and turn the cam
lock. A small gap might happen
which is normal, and it will close
when all the cam locks are turned.
☛ This unit uses special cam bolts and locks. The following explains how to assemble using this kind
of hardware. This is not and assembly step, just a guide for when you have to use these kind of
special hardware.
Bolt
Cam lock
ALIGNMENT
DIRECTION
SCREWS LIST
P.3
RTA-7050
P.3
No. Figure Size qty. No. Figure Size Qty.
MAIN PARTS LAYOUT (for reference)
❶
❷
❸
❸
❹
❺
❻
❼
❽
❾
⓬
⓮
⓮